
Bastrop Water Filtration Where Every Valve and Bracket Is Set Right
We test your water, then install whole-home filtration, water softeners, salt-free conditioners and reverse osmosis systems in your home. The equipment matters, but the bypass valve, the drain air gap and the way each tank is supported decide how long it runs. We work in Bastrop, Elgin, Smithville and nearby.
- Free water test
- Free quote by phone
- Free installation
- Every joint leak-checked
Filtration, Softening and Testing for Your Home
Testing usually comes first, since hardness, iron, a sulfur smell and chlorine taste each need their own media. Based on the results, we put whole-home filtration on the main line, a water softener or salt-free conditioner to stop scale, or a reverse osmosis unit under the kitchen sink for drinking water. Iron and sulfur removal, UV purification and well water treatment are on the list too. Every service page spells out what the system takes out, what it leaves in and how much care it needs.

Whole-Home Filtration
A point-of-entry carbon system that treats every tap and shower in your home, sized to your flow rate and plumbed so filter changes take minutes.
Salt-Free Water Conditioners
Scale control without salt, brine or a drain line, sized to your household's peak flow and plumbed with a bypass and prefilter you can actually reach.
Water Testing & Analysis
We measure hardness, iron, chlorine, pH and dissolved solids at your tap, then show you which results call for equipment and which do not.
Water Softener Installation
Ion-exchange softeners sized from your measured hardness, with a bypass valve, a code-correct drain and a level, serviceable brine tank.
Reverse Osmosis Systems
Under-sink reverse osmosis for drinking and cooking water, installed with square-cut tubing, a correctly placed drain saddle and a flushed, tested first tank.
Well Water Filtration
Filtration for homes on private wells, matched to what a test finds in your water and sized to what your well pump can deliver.
Iron and Sulfur Removal
Oxidizing filters that take out dissolved iron, manganese and hydrogen sulfide, sized to your water test and your pump's flow rate.
UV Water Purification
UV-C disinfection that inactivates bacteria, viruses and cysts without chemicals, sized to your flow rate and protected by the right pretreatment.
How a Job Runs From First Call to First Glass
A typical install fills a morning or an afternoon. The house goes without water just for the short time it takes us to tie into the main.
- 1
Tell us what you notice
On the phone we ask about taste, odor, stains and scale on fixtures, plus where your supply comes from, a utility line or a well on your property. Those answers decide what we test for.
- 2
Free water test at your home
We test hardness, iron, pH and chlorine, and note your water pressure and where the main line enters. You see each reading as we take it.
- 3
Written quote with options
You get the recommended system, any smaller alternative and the upkeep schedule. We point out where the bypass, drain and tank will go so there are no surprises.
- 4
Install, flush and check
We lay down floor protection, shut off the main, cut in the bypass and set the tanks. After startup we flush the media, check every joint under pressure and set the control valve for your household.
- 5
Walkthrough before we leave
We show you the bypass handles, how to read the valve display and when each filter or salt refill is due. The work area is cleaned up before we go.

Why the Small Install Details Matter
A good filter installed carelessly fails early. Here is how we put systems in so they keep working.
- A three-valve bypass on every system
- We plumb an inlet, outlet and bypass valve around each tank. When media needs changing or a valve head needs service, you turn three handles and still have water in the house.
- Drain lines with a real air gap
- Softener and reverse osmosis drain lines get a proper air gap or approved drain fitting, never a hose stuffed into a standpipe. That keeps wastewater from siphoning back toward your treated water.
- Tanks set level and supported
- Media tanks sit on a level, solid base, and heavy filter housings get a bracket instead of hanging off the pipe. Plumbing that carries a full tank's weight can loosen its joints within a few years.
- Media flushed before you drink it
- New carbon and resin release fines and color when first wetted. We backwash and rinse until the water runs clear, then sanitize RO housings before the first glass.
- Recommendations that follow the test
- If your hardness reading does not justify a softener, we say so. You get the readings, what they mean and the smallest system that solves the problem.

A Small Shop That Cares About the Plumbing Around the Tank
Bastrop Water Filtration installs and services water treatment equipment in homes around Bastrop. We spend as much time on the connections as on the system itself, because that is where most of the problems we get called about begin: a softener drain that backs up, a filter housing that weeps at the threads, a tank with no bypass so the house loses water during service.
Hard water is common across Central Texas, and scale shows up first on showerheads, faucet aerators and inside water heaters. Not every home needs the same answer, though. We test, explain the numbers in plain terms, and recommend the system that fits your water, your plumbing and the space you have.
Where We Work
We install and service systems in homes throughout Bastrop and the surrounding area. That includes Elgin to the north, Smithville to the southeast, and Cedar Creek, Wyldwood, Circle D-KC Estates and the Camp Swift area. City water and private wells call for different testing, and we handle both.
- Bastrop
- Camp Swift
- Circle D-KC Estates
- Wyldwood
- Smithville
- Cedar Creek
- Elgin
If you are not sure whether we reach your address, ask when you phone for your free quote.
What Shapes the Price of a Water System
We offer free installation, so your quote is mostly about the equipment your water needs. Two homes on the same street can need very different systems. These are the things that move the number.
After the free water test we give you a written quote that names each part and stage. Nothing gets added on install day without your say.
- What the test finds
- Treating disinfectant taste takes one carbon tank. Hardness plus iron plus a sulfur odor can take two or three stages in a set order, each with its own media.
- Flow rate and home size
- A system has to keep up when the shower, dishwasher and washer run together. More bathrooms usually means a larger tank or valve so your pressure does not drop.
- Media and tank choices
- Catalytic carbon, standard carbon, softening resin and template-assisted conditioning media differ in cost and service life. We explain which one fits your readings and why.
- Your existing plumbing
- Copper, PEX and older galvanized lines need different fittings and transitions. A main line that is hard to reach or has no nearby drain changes the parts list.
- Point of use versus whole home
- An under-sink reverse osmosis unit treats drinking and cooking water only. A whole-home system treats every tap and fixture, and it is priced that way.
- Ongoing upkeep
- Filter cartridges, RO membranes, salt and UV lamps all have replacement intervals. We include those costs in the conversation so the yearly figure is not a surprise.
What Bastrop Homeowners Ask Us
Is a water softener really necessary for my home?
The hardness number settles it. When calcium and magnesium run high enough to clog aerators and scale up your water heater, a softener pays for itself. When the number is low, a salt-free conditioner or skipping hardness treatment entirely may make more sense. You see the reading before we recommend anything.
What is checked during the free water test?
In your home we measure hardness, iron, pH and chlorine, and we watch for clues like orange stains or a rotten-egg smell that suggest iron or sulfur. We also note your water pressure and pipe material, because both shape which system will work. When lab testing is worth it, we explain the reason.
Does a whole-house system lower shower pressure?
Not if it is sized right. With the tank and valve matched to your home's peak water use, most people cannot tell the difference. Weak flow after an install nearly always comes from an undersized valve or a sediment cartridge clogged with grit. We size for your heaviest use and show you how to tell when the prefilter needs changing.
Does a reverse osmosis unit waste water, and where does it drain?
Part of the water fed to the membrane is sent to drain, carrying away whatever the membrane holds back. We run that line through an air gap faucet or an approved drain saddle so wastewater has no path back. A permeate pump or a pressure-boosted unit reduces how much goes to drain.
Is there a warranty on the equipment?
Yes. Tanks and ceramic discs carry a lifetime warranty, the control valve, circuit board and filter media carry 5 years, and labor carries 1 year. When we go over your quote, we point out which parts fall under each term.
How long is the water shut off during installation?
Just while we open the main line and tie in the bypass, which takes up a small part of the visit. As soon as the bypass is connected, your water is back on while we place and rinse the tanks.
How much maintenance will my system need?
That depends on the system. Sediment cartridges and carbon media get replaced on a schedule, softeners use salt, RO units need prefilters and now and then a new membrane, and UV units need a new lamp every year. You get the schedule in writing during the walkthrough.
Start With a Free Water Test
We will tell you what is in your water, what system fits it and how we would install it in your home. Free installation is part of the offer.